Skip to main content

Migrating from Debian 12 to Debian 13 on the same server, while upgrading Centreon to version 26.10

Use this procedure if you are running Centreon 24.04, 24.10 or 25.10 on Debian 12 and you wish to upgrade to Centreon 26.10 (only Debian 13 is supported for this version).

Run every command as root. Read each comment in the code blocks before running commands.

Step 1: Before you start​

1.1 Take a snapshot of each server​

Snapshot every server (central server, database server, MAP server, MBI server). If you have a remote database, take both snapshots at the same time, with Centreon stopped if possible. It is the only way to roll back quickly.

1.2 Create dumps​

Snapshots let you roll back a whole server quickly, but they do not replace backups. They usually share the VM's storage, capture databases only in a crash-consistent state, and cannot restore a single database or file. Once your snapshots are done, also make the backups below.

B=/root/upgrade-2610-backup; mkdir -p $B
# On the server that hosts the database (local or remote)
mysqldump --single-transaction --routines --triggers --events centreon         | gzip > $B/centreon.sql.gz
mysqldump --single-transaction --routines --triggers --events centreon_storage | gzip > $B/centreon_storage.sql.gz
# On your MAP server, if you have one
mysqldump --single-transaction --routines --triggers --events centreon_map     | gzip > $B/centreon_map.sql.gz   
zcat $B/centreon_storage.sql.gz | tail -n 1                                     # Expected results: "-- Dump completed on …"
# On every server
tar czf $B/etc-$(hostname).tar.gz -C / etc
dpkg -l > $B/dpkg-l.txt
systemctl list-unit-files --state=enabled > $B/enabled-units.txt

1.3 Check that cron and logrotate are installed (on every Centreon server)​

Centreon needs cron to run its scheduled jobs and logrotate to rotate its logs. Minimal Debian images often include neither, and nothing warns you when they are missing. Run the following commands and follow the instructions in the comments.

# list the cron job files installed by Centreon: are there any?
ls /etc/cron.d/ | grep -iE "centreon|centstorage"
# check whether cron is installed and install it if it is missing, then activate it and check that it is active
dpkg -l cron | grep -q "^ii" || apt-get install -y cron     
systemctl enable --now cron && systemctl is-active cron
# make sure logrotate is installed, install it if it is missing
dpkg -l logrotate | grep -q "^ii" || apt-get install -y logrotate
# set the permissions of the two Centreon rotation configurations, for Centreon Broker (cbd) and Centreon Engine (centengine)
chmod 644 /etc/logrotate.d/cbd /etc/logrotate.d/centengine 2>/dev/null
# do a dry run that parses the whole configuration and shows what it would do without rotating anything
logrotate -d /etc/logrotate.conf 2>&1 | grep -E "^error|Ignoring"
  • Without cron, the Centreon jobs never run and no error is shown. This affects the MBI jobs (ETL, purge, backup) in particular.
  • Without logrotate, Centreon logs are never rotated.
  • The chmod 644 line is a workaround. The Broker and Engine logrotate files are shipped with permissions 0664, so logrotate ignores them. A package upgrade can restore 0664, so check again in step 9.

Step 2: Prepare your platform for the upgrade​

2.1 Upgrade your Centreon version to version 25.10​

Upgrade/update your central server, your pollers and your remote servers.

2.2 Check the state of the server​

Before starting the upgrade, check that the server is in the expected state: Debian 12, enough free disk space, and working package repositories. If any result differs from the expected one, fix it before going further.

# check that the version of Debian is 12.x
cat /etc/debian_version
# check that your Centreon version is 25.10.x                    
dpkg -l centreon-web | awk '/^ii/{print $3}'
# check that your have several GB free (the migration installs ~1,300 packages)
df -h / /var /var/lib/mysql
# update your system: there should be no errors (e.g., a broken repository blocks the upgrade to Debian 13)
apt-get update

Step 3: Update Debian 12 to the latest version​

The following commands bring the server to the latest Debian 12 minor version before the major migration to Debian 13.

apt-get update
# upgrade every installed package to the newest available version, without asking any questions, and keep your existing configuration files
DEBIAN_FRONTEND=noninteractive apt-get -y -o Dpkg::Options::=--force-confold full-upgrade
# check that you have the latest 12.x version
cat /etc/debian_version
# reboot your machine
systemctl reboot
If…Do
apt-get update fails on the MaxScale line (NO_PUBKEY) in mariadb.listComment only that line (the file also holds the MariaDB server repository)
If you have MySQL, if mysql-apt-config is upgradedNothing: mysql.list is kept

After the reboot, check that the web interface works and that the pollers are connected. You can update the servers in any order (central server or database server first).

Step 4: Upgrade a remote database server (if applicable)​

Do this only if your database runs on its own server, separate from the central. Before you start, make sure Centreon is already stopped on the central server. If needed, stop all Centreon services:

systemctl stop centengine cbd gorgoned smtptrapd centreontrapd snmpd

4.1 Back up the configuration and stop the database​

Run these commands on the database server:

# create the backup folder used in the rest of the procedure, with a subfolder for the apt configuration
B=/root/upgrade-2610-backup; mkdir -p $B/apt-bookworm
# back up the apt sources and the MySQL/MariaDB configuration
cp -a /etc/apt/sources.list /etc/apt/sources.list.d /etc/mysql $B/apt-bookworm/
# stop your database: if you have MySQL, do "systemctl stop mysql" instead
systemctl stop mariadb

4.2 Upgrade the server​

  1. Update the repositories: steps 5.1, 5.2 and 5.3. Here you only need the standard repository and the plugins repository. The centreon-mariadb and centreon-mysql packages come from the standard repository.
  2. Run the simulation (step 5.4). You should see:
    • mariadb-server 11.8, or mysql-community-server 8.4.x-1debian13
    • centreon-mariadb or centreon-mysql at 26.10
    • no centreon-web, because it is not installed on this server
  3. Run the upgrade (step 6).

4.3 Check the result​

# list any packages in an abnormal state. you should have none
dpkg -l | awk 'NR>5 && $1 != "ii" && $1 != "rc"'
# check that your version of Debian is 13.x
cat /etc/debian_version
# check that your database is active (if you have MySQL, replace "mariadb" by "mysql")
systemctl is-active mariadb
# check the version of your database. MariaDB should be 11.8.x, MySQL should be 8.4.x. Both should have read-only as 0
mariadb -e "SELECT @@version, @@read_only"
## check and upgrade mariadb: skip this line if you have MySQL
mariadb-upgrade --check-if-upgrade-is-needed && echo "run: mariadb-upgrade" || echo "done"
# check that both databases are listed
mariadb -e "SHOW DATABASES" | grep -E "^centreon(_storage)?$"
# if you have MySQL, check the logs for any errors. The correct log mesage is "ready for connections. Version: '8.4.x'"
tail -n 5 /var/log/mysql/error.log
# list the new MariaDB/MySQL config files that the upgrade didn’t apply because you had modified the originals
find /etc/mysql -name "*.dpkg-dist"
# enable the database and restart it: use mysql instead of mariadb if applicable.
systemctl enable mariadb && systemctl reboot

For MySQL, use mysql instead of mariadb in the commands above.

4.4 Check the connection from the central​

After the reboot, run this on the central server, replacing <database server> with the address of your database server:

timeout 3 bash -c '</dev/tcp/<database server>/3306' && echo OK

It should print OK. (This command is used because nc is not installed by default.)

4.5 Troubleshooting​

If you seeWhat to do
A file named 50-server.cnf.dpkg-distKeep your own file and ignore the new one. The new file sets bind-address = 127.0.0.1, which only allows local connections, so the central could no longer reach the database. Your file should have bind-address = 0.0.0.0 (or the server's IP address) and utf8mb4.
MariaDB does not startRun systemctl start mariadb, then read the details with journalctl -u mariadb. The usual cause is an option in your tuning file that was removed or renamed in the new MariaDB version.
read_only is 1Run mariadb -e "SET GLOBAL read_only=OFF", then delete the read_only line from your configuration. That setting is meant for replica servers.

Step 5: Switch the repositories (on every server you upgrade)​

The commands edit your existing repository files (either deb822 *.sources files or one-line *.list files). Do not add a new file next to an old one: the 25.10 and 26.10 repositories would mix.

# create a the backup folder
B=/root/upgrade-2610-backup; mkdir -p $B/apt-bookworm
# save the apt repository configuration
cp -a /etc/apt/sources.list /etc/apt/sources.list.d $B/apt-bookworm/
# back up the Apache configuration file for the Centreon web interface
cp -a /etc/apache2/sites-available/centreon.conf $B/apache-centreon.conf.2510 2>/dev/null
# list the extra apt repository files configured on the server
ls /etc/apt/sources.list.d/

5.1 On your Debian OS​

Point APT at the Debian 13 repositories instead of Debian 12. It only edits configuration files, nothing is downloaded or upgraded yet.

[ -f /etc/apt/sources.list.d/debian.sources ] && sed -i 's/bookworm/trixie/g' /etc/apt/sources.list.d/debian.sources
sed -i 's/bookworm/trixie/g' /etc/apt/sources.list
grep -rqs "trixie-backports" /etc/apt/sources.list /etc/apt/sources.list.d/ || \
  echo "deb http://deb.debian.org/debian/ trixie-backports main non-free-firmware" >> /etc/apt/sources.list

5.2 On Centreon​

5.2 Centreon (any file name: centreon-25.10-stable.list, centreon-stable.list, …)

Point the Centreon repositories at the 26.10 packages for Debian 13. It only edits APT configuration files, nothing is upgraded yet.

for f in $(grep -lE "packages.centreon.com|centreon.jfrog.io" /etc/apt/sources.list.d/*.list); do
  sed -i -E -e 's/bookworm-25\.10-[a-z-]+/trixie-26.10-stable/g' -e 's/ (bookworm|bullseye) / trixie /g' "$f"
  echo "== $f"; cat "$f"
done
grep -qs "apt-plugins-stable/\? trixie" /etc/apt/sources.list.d/*.list || \
  echo "deb https://packages.centreon.com/apt-plugins-stable/ trixie main" > /etc/apt/sources.list.d/centreon-plugins-stable.list
mv centreon-25.10-stable.list centreon-26.10-stable.list
Repository lineRequired?
apt-standard/ …Yes
apt-plugins-stable/ trixieYes: trixie builds of the Perl libs (Net::Curl, Libssh::Session…)
apt-business/ …Only with Business modules (required on the MBI server)
apt-plugins-testing/ bookworm (or apt-plugins-testing trixie after the switch)Optional
centreon.jfrog.io/…/apt-connectors-stable/Optional

File names keep 25.10: cosmetic (mv centreon-25.10-stable.list centreon-26.10-stable.list if you want).

5.3 On the database server​

Run this on every server that hosts a database: the central server (if the database is local), the remote database server, and the MAP or MBI server.

Update the database repositories for Debian 13. For MariaDB it also changes the version, from 10.11 to 11.8. It only edits APT configuration files and upgrades nothing yet.

for f in /etc/apt/sources.list.d/mariadb.sources /etc/apt/sources.list.d/mariadb.list; do
  [ -f "$f" ] || continue
  sed -i -e 's|mariadb-server/10.11/|mariadb-server/11.8/|' -e 's/bookworm/trixie/g' "$f"
  echo "== $f"; grep -vE "^\s*#|^\s*$" "$f"
done
If…Do / know
No mariadb.* fileMariaDB comes from Debian: Debian 13 ships 11.8, nothing to do
if you have mySQL: mysql.list points to mysql-8.0Stop: repo.mysql.com trixie has no 8.0. Upgrade to 8.4 LTS on Debian 12 first (trixie has mysql-8.4-lts, mysql-9.7-lts, mysql-innovation, plus mysql-apt-config, mysql-tools)
if you have mySQL: debconf line skippedA later mysql-apt-config reconfiguration (dpkg-reconfigure, new package version) may write bookworm back. With it: kept (checked; prints a harmless gpg: cannot open '/dev/tty')
*.disabled, *.old_* filesIgnored by apt
MaxScale line commented in step 3Stays commented

5.4 Check and simulate​

This step is a dry-run check before the real upgrade. It verifies that the repository changes are correct and simulates the upgrade, so you can spot problems while nothing has been modified yet. The comment at the end of each line is the expected result.

# check that no active line in the apt source files still points to Debian 12. There should be nothing
grep -rn bookworm /etc/apt/sources.list /etc/apt/sources.list.d/ | grep -v ":\s*#"
# clear apt’s local package cache, then download the package lists from the newly configured Debian 13 repositories. no line should start with W: or E:
apt clean && apt-get update
# simulate the full upgrade without changing anything and save the result to a file
apt-get -s full-upgrade > $B/sim.txt
# check the number of upgraded/new/removed packages
tail -n 3 $B/sim.txt
# check that no simulation file for dependency problems would stop or break the upgrade
grep -iE "broken|unmet" $B/sim.txt
# check which versions the upgrade would install for the web interface, PHP, and the database server
grep -E "^Inst (centreon-web|php8.4-fpm|mariadb-server|mysql-community-server) " $B/sim.txt
# check that the upgrade would remove no Centreon package
grep -E "^Remv centreon" $B/sim.txt
  • If the simulation shows broken packages, stop and restore the sources: cp -a $B/apt-bookworm/* /etc/apt/.
  • If everything matches the expected results, you can proceed to the real upgrade. If not, fix the repositories first. Nothing has changed on the system at this point, so the check is safe to repeat.

Step 6: Upgrade (every server you upgrade)​

This is the real upgrade to Debian 13. It runs the upgrade in the background, in two stages, and then lets you watch its progress.

# run the actual Debian 13 / Centreon 26.10 upgrade in the background
systemd-run --unit=upg2610 /bin/sh -c 'export DEBIAN_FRONTEND=noninteractive; O="-o Dpkg::Options::=--force-confold -o Dpkg::Options::=--force-confdef"; apt-get -y $O upgrade --without-new-pkgs > /root/upgrade-2610-backup/upg-step1.log 2>&1 && apt-get -y $O full-upgrade > /root/upgrade-2610-backup/upg-step2.log 2>&1'
# show every 10 seconds whether apt or dpkg is still running. The upgrade is done when both pgrep print nothing
watch -n 10 'pgrep -x apt-get; pgrep -x dpkg; tail -n 2 /root/upgrade-2610-backup/upg-step2.log'
  • Don't interrupt it and don't reboot until it's finished, even if it seems slow (about 1,300 packages).
  • Duration: central ~10–15 min, database/MBI server ~6 min, poller ~6 min.
  • systemd-run: the upgrade survives an SSH disconnection (openssh-server is upgraded).
  • Wait on the processes, not on the unit state (unreliable while systemd itself is upgraded).
  • Expected in the logs: chmod: cannot access '/var/cache/centreon/config/broker/*' and …/engine/*.
  • Do not reboot yet.

Then stop Centreon again on the central server. The 26.10 packages restart the services (and cron, if it was upgraded), but the database schema stays at 25.10 until you run the update wizard in step 8. Until then, Gorgone logs Unknown column 'uid' in 'field list' / [legacycmd] Cannot get configuration for pollers every 15 s.

systemctl stop centengine cbd gorgoned centreontrapd cron
## If you have MAP, run this
systemctl stop centreon-map-engine 2>/dev/null

Step 7: Checks after the packages​

7.1 Run checks​

This step is the post-upgrade verification (7.1 to 7.4), followed by switching the web stack to PHP 8.4. It checks that the upgrade to Debian 13 went cleanly and that nothing was left half-done. The comment on each line is the expected result.

# 7.1 list any package that isn’t in a normal state: the command should print nothing
dpkg -l | awk 'NR>5 && $1 != "ii" && $1 != "rc"'
# search both upgrade logs for warnings and errors: there should be nothing
grep -hE "^(W|E):|dpkg: (error|erreur)" /root/upgrade-2610-backup/upg-step*.log
# check that the Debian version is 13.x
cat /etc/debian_version
# show the installed version of the main Centreon packages and of PHP-FPM
dpkg -l centreon-web centreon-engine centreon-broker centreon-gorgone php8.4-fpm | awk '/^ii/{print $2, $3}'
# 7.2 list any installed packages whose version still carries a Debian 12 marker. There should be only obsolete Debian libs (libperl5.36, perl-modules-5.36…)
dpkg -l | awk '/^ii/ && $3 ~ /deb12/ {print $2, $3}'
# check that three Perl modules used by Centreon still load correctly after the upgrade (if they do, it prints OK) 
perl -MCrypt::OpenSSL::AES -MNet::Curl -MLibssh::Session -e 'print "OK\n"'
# 7.3 list the new config files the upgrade set aside for Apache, Centreon, PHP and MySQL/MariaDB
find /etc -name "*.dpkg-dist" -o -name "*.ucf-dist" | grep -E "apache2|centreon|php|mysql"
# 7.4 switche PHP-FPM from the old PHP 8.2 service to the new PHP 8.4 one
systemctl enable --now php8.4-fpm; systemctl disable --now php8.2-fpm 2>/dev/null
# restart Apache
systemctl restart apache2
# check that the Centreon interface responds (with an HTTP 200 status code)
curl -s -o /dev/null -w "%{http_code}\n" http://localhost/centreon/
If… (7.2 / 7.3)Do
A Centreon or lib*-perl package still deb12, or Perl not OKapt-get install --reinstall <package>; check apt-plugins-stable trixie (5.2)
If you have MAP, openjdk-17-jre-headless still deb12Normal: MAP 26.10 uses Java 25 (openjdk-25-jre-headless, now default). After validation: apt purge openjdk-17-jre-headless
apache2/…/centreon.conf.dpkg-distApache merge (step 2): 26.10 adds the Gorgone websocket ProxyPass block
/etc/centreon-engine/centengine.cfg.dpkg-dist, /etc/centreon-broker/central-module.json.dpkg-distKeep yours (generated by the export)
/etc/mysql/mariadb.conf.d/50-server.cnf.dpkg-distKeep yours (package sets bind-address = 127.0.0.1)
If you have MAP, /etc/centreon-map/map-config.properties.dpkg-distKeep yours: it is a template (%CENTREON_BROKER_ADDRESS%, %CENTREON_PWD%…)

7.2 Check the database​

If you have a local database, run this on the central server. If your database is on a separate server, run this on that server, not on the central.

This step is the database health check after the upgrade. It confirms that the new MariaDB 11.8 is running, writable, upgraded internally, and that the Centreon databases are still there. The comments give the expected result, with the MySQL variant after the dash.

systemctl is-active mariadb                                        # active   — [MySQL] mysql
mariadb -e "SELECT @@version, @@read_only"                         # 11.8.x, 0 — [MySQL] 8.4.x, 0
mariadb-upgrade --check-if-upgrade-is-needed && echo "run: mariadb-upgrade" || echo "done"   # [MySQL] skip
mariadb -e "SHOW DATABASES" | grep -E "^centreon(_storage|_map)?$"
journalctl -u mariadb --since "-1h" | grep -iE "error|warning" | tail -n 20   # [MySQL] tail /var/log/mysql/error.log
  • If MariaDB isn't active, or the version query shows read_only = 1 (the database refuses writes), use the troubleshooting table from step 4.
  • If the check prints "run: mariadb-upgrade", run mariadb-upgrade. It takes its login details from /root/.my.cnf. When it works, it finishes with return code 0 after 8 phases, and running the check again reports that no upgrade is needed. Why this happens: the MariaDB package normally updates the database's internal system tables during the upgrade. It can't do this if the MariaDB root account has a password, and it won't warn you. MariaDB 11.8 then runs on system tables still in the 10.11 format. If root logs in through unix_socket (no password), the package does it by itself, as it did on the database servers we tested.

Step 8: Finalize the upgrade on the central server​

8.1 On the web interface​

First, clear your browser cache so you don't see old pages from 25.10. (If you use MAP, its documentation has the same step.)

  1. Run the update wizard to 26.10. Click Finish only once. The wizard log may show Undefined array key "is_reverse" in Update-25.11.0.php. If you use the Centreon Monitoring Agent, check the connection mode of each agent configuration. It should be set to "agent initiated", which is the default.
  2. Update the modules in Administration > Extensions > Manager. Update them one at a time, and wait for each to finish before starting the next.
    • If you use MAP, update both the MAP module and the MAP widget. They have separate buttons.
    • Avoid Update all. On both test platforms, it left auto-discovery not updated until a second request. If you use it anyway, check that auto-discovery shows version 26.10.
  3. Apply the updates in the Monitoring Connector Manager.

8.2 On the central server​

To restart Centreon on the new version, run these commands on the central server:

cd /usr/share/centreon && sudo -u www-data php bin/console cache:clear
usermod -a -G centreon-broker www-data
usermod -a -G www-data centreon-broker
sudo -u www-data php /usr/share/centreon/bin/console w:m:c --dry-run   # "No invalid commands found."
systemctl restart cbd centengine gorgoned centreontrapd
systemctl start centreon-map-engine                                   # [MAP]

What these commands do:

  • Clear the web application cache.
  • Let the web server and Broker access each other's files.
  • Check for invalid Engine and Broker commands. If the check lists any, run it again without --dry-run to remove them. (w:m:c is short for web:monitoring-server:clean-engine-broker-command.)
  • Restart the monitoring services, and start the MAP engine if you use MAP.

If you use MAP, check that it works:

  • systemctl is-active centreon-map-engine should print active.
  • Run for p in $(pgrep -x java); do readlink -f /proc/$p/exe; done. The result should contain java-25-openjdk.
  • Run grep -E "ERROR|Connection with Broker established" /var/log/centreon-map/centreon-map-engine.log | tail -n 5. You should see that the connection with Broker is established. A few Error while connecting to Broker messages are normal while Broker restarts.

8.3 Export the configuration from the web interface​

  1. Export the central server's configuration with Generate, Move export files and Restart all checked. If you skip Move export files, the new files stay in /var/cache/centreon/config and Engine 26.10 keeps using the old configuration.

  2. Restart the services one last time

    systemctl restart cbd centengine centreontrapd gorgoned
    systemctl start cron

    This makes the services load the new configuration and turns scheduled jobs (cron) back on.

Step 9: Make sure everything starts at boot, then reboot​

  1. Run these commands on the central server:

    systemctl enable centengine cbd gorgoned centreontrapd snmptrapd.socket php8.4-fpm apache2 cron
    systemctl enable centreon-map-engine 2>/dev/null                 # [MAP]
    systemctl enable mariadb                                         # [local database] or local MAP database — [MySQL] mysql
    diff <(awk '{print $1}' /root/upgrade-2610-backup/enabled-units.txt | sort) \
        <(systemctl list-unit-files --state=enabled | awk '{print $1}' | sort)   # php8.2 → php8.4 expected
    systemctl reboot

    What these commands do:

    • Make sure all Centreon services, the web server, PHP 8.4, cron and the database start automatically at boot.
    • Compare the list of services enabled before the upgrade (saved in step 1.2) with the current list. The only expected difference is php8.2-fpm replaced by php8.4-fpm. Anything else deserves a look.
    • Reboot the server.

  2. After the reboot, check that everything works:

uname -r                                       # 6.12.x
systemctl --failed                             # 0 units
for u in centengine cbd gorgoned centreontrapd php8.4-fpm apache2 mariadb centreon-map-engine cron; do printf "%s=%s " $u $(systemctl is-active $u); done; echo
ls /etc/cron.d/                                # centreon, centstorage
ss -ulnp | grep ":162 "                        # SNMP traps: UDP 162 held by systemd
logrotate -d /etc/logrotate.conf 2>&1 | grep -E "^error|Ignoring"   # nothing (else table below)
systemctl is-active centreontrapd              # active (see the table below)

What you should see:

  • The kernel version starts with 6.12.
  • No failed services.
  • Each service reports active.
  • The Centreon cron files (centreon, centstorage) are in /etc/cron.d/.
  • Port UDP 162, used for SNMP traps, is held by systemd.
What you seeWhat it means and what to do
snmptrapd is inactiveNormal on Debian 13. It starts on demand when the first trap arrives.
centreontrapd is inactive, with exit 0/SUCCESSThe trap database is empty. See step 10, centreontrapd.
cron is inactiveRun systemctl enable --now cron (See step 1.4.)
logrotate.service failed (Ignoring cbd / centengine)chmod 644 /etc/logrotate.d/cbd /etc/logrotate.d/centengine; systemctl start logrotate

Finally, check the web interface:

  • Configuration > Pollers: all pollers are running and were updated recently. There should be no duplicate Central entry. (The 26.10 Broker registers the central under a new instance ID, so a duplicate can appear.)
  • Resources Status: force a check, acknowledge a problem and set a downtime, to confirm they work.
  • Graphs are drawn.
  • Gorgone is connected.

Step 10: Upgrade the pollers (after the central)​

Allow about 6 minutes per poller. Do each poller one at a time.

  1. Back up and update Debian 12. Do the system part of step 1.2, then step 3 (Debian 12 point release and reboot).

  2. Stop the monitoring services:

    systemctl stop centengine gorgoned centreontrapd

  3. Upgrade to Debian 13 and Centreon 26.10. Do steps 5.1 and 5.2 (APT repositories, standard and plugins), then step 5.4 and step 6. After step 5.4, you should see centreon-poller, centreon-engine, centreon-broker and centreon-gorgone at 26.10.0, plugins built for deb13, and no package removed.

  4. Check the result. Do steps 7.1 and 7.2. If centengine.cfg.dpkg-dist exists, keep your own file.

  5. Reboot, then export the poller's configuration from the central server, with Generate, Move export files and Restart all checked.

  6. Check that everything works:

    systemctl --failed                                     # 0 units
    systemctl is-active centengine gorgoned centreontrapd  # all active
    grep -E "Centreon Engine 26.10|Configuration loaded" /var/log/centreon-engine/centengine.log | tail -n 2
    ss -tn | grep -E ":5669|:5556"                         # Broker (5669) and Gorgone (5556) connected to the central
    ls -l /etc/snmp/centreon_traps/centreontrapd.sdb       # file is not empty
    logrotate -d /etc/logrotate.conf 2>&1 | grep -E "^error|Ignoring"   # nothing (else 1.4)

If centreontrapd stops by itself​

If the trap database centreontrapd.sdb is empty, centreontrapd stops one second after it starts. In /var/log/centreon/centreontrapd.log, you will see MySQL error: no such table: cfg_nagios. systemd reports inactive (dead) with status 0/SUCCESS, so there is no alert, and no SNMP trap is processed.

To fix it:

  1. In the web interface, go to Configuration > SNMP Traps > Generate.
  2. Select the poller.
  3. Check Generate traps database, Apply configurations and Restart centreontrapd.

The upgrade does not cause this problem. It was also seen on 25.10 after a simple reboot.

What to expect​

  • Acknowledgements and downtimes survive the poller upgrade, thanks to retention.
  • The downtimes history gets a new row when Engine restarts. This is normal.

Step 11: Upgrade your MBI server (if applicable)​

The central server needs nothing extra. centreon-bi-server is upgraded in step 6, and the MBI module and widgets are updated in step 8.

On the reporting server, make sure no ETL run is in progress: check with ps -ef | grep -i etl that none is in progress.

11.1 Before the upgrade​

  1. Back up the server:

    B=/root/upgrade-2610-backup; mkdir -p $B
    tar czf $B/etc-$(hostname).tar.gz -C / etc; dpkg -l > $B/dpkg-l.txt
    systemctl list-unit-files --state=enabled > $B/enabled-units.txt

    Also back up the reporting database, as described on the MBI page Backing up and restoring MBI.

  2. Make sure cron is installed (see step 1.4).

    dpkg -l cron | grep -q "^ii" || apt-get install -y cron

  3. Stop the services:

    systemctl stop cbis gorgoned cron

11.2 Upgrade​

  1. Do step 3 (Debian 12 point release and reboot), if not already done.
  2. Do steps 5.1 and 5.2 (standard, business and plugins repositories), then step 5.3 (MariaDB or MySQL repository).
  3. Do step 5.4, then step 6. In the simulation, you should see centreon-bi-reporting-server, centreon-bi-engine, centreon-bi-etl and centreon-bi-report at 26.10.0, plus openjdk-25-jdk. No package should be removed.

11.3 Check and restart​

dpkg -l | awk 'NR>5 && $1 != "ii" && $1 != "rc"'                       # nothing
dpkg -l "centreon-bi*" | awk '/^ii/{print $2, $3}'                      # 26.10.0
java -version 2>&1 | head -n 1                                           # openjdk 25
grep ExecStart /lib/systemd/system/cbis.service | grep -o "java-[0-9]*-openjdk"   # java-25-openjdk
find /etc -name "*.dpkg-dist" | grep -E "centreon|mysql"                 # keep yours (bind-address)
systemctl is-active mariadb                                              # local reporting DB (MySQL: mysql)
systemctl start cbis; systemctl enable --now gorgoned cron
systemctl is-active cbis gorgoned cron                                   # all active
ls /etc/cron.d/ | grep centreon-bi                                       # engine, purge, backup-reporting-server
tail -n 20 /var/log/centreon-bi/cbis.$(date +%F).log                     # no "Connection test … failed"

Then reboot and check again that cbis, gorgoned and cron are active. After 07:30 on the next weekday, /var/log/centreon-bi/centreonBIETL.log should show the ETL run.

Good to know​

  • Java 25, not 17. MBI 26.10 uses Java 25. centreon-bi-engine pulls in openjdk-25-jdk, and cbis.service runs /usr/lib/jvm/java-25-openjdk-amd64/bin/java directly. The Java 17 left over from Debian 12 is unused. After validation, remove it with apt purge openjdk-17-*.

Known issues​

Here is the table without the Ticket column:

WhenYou seeDo
MBI serverNothing: ETL, purge, backup never run (cron absent)1.4: install/enable cron; check centreonBIETL.log next weekday
Reboot (central, poller)centreontrapd inactive, exit 0, no such table: cfg_nagiosGenerate the SNMP traps database, restart centreontrapd
Any server, after the upgradelogrotate.service failed, Ignoring cbd … writable by group or others; or no logrotate at all (25.10)1.4: install logrotate, chmod 644 cbd/centengine
Step 2dpkg error, chmod … .ssh/id_rsadpkg --configure -a, all ii
Steps 2, 8 (extensions)cache:clear error, Cannot rename / Failed to read file …/symfon_One module at a time; cache:clear alone; check versions
Step 8 (Update all)auto-discovery still on 25.10 after the batchUpdate it again, check 26.10
Steps 2, 8 (wizard)Last step sent twice, HTTP 500Click Finish once; update done anyway
Step 8 (wizard log)Undefined array key "is_reverse" in Update-25.11.0.phpCheck Monitoring Agent connection modes
Exportauto_reschedule_checks is no longer availableWarning only
Steps 2, 6 (package logs)chmod: cannot access '/var/cache/centreon/config/broker/*'Harmless
25.10 pollersAck closed in history when the service enters a downtimePollers on latest 25.10 first; upgrade them soon
MBI docJava 17 required, no Debian 13 tab, no cronFollow section 11
Official docNo Debian 12 → 13 path for 25.10 → 26.10This document
Step 6 → 8Gorgone Unknown column 'uid' every 15 sStop Centreon again after step 6
Steps 2, 7 (custom Apache)centreon.conf.dpkg-dist, new vhost not appliedApache merge
4b, 7.3, 1150-server.cnf.dpkg-dist with bind-address = 127.0.0.1Keep yours
Step 7.2Plugins / Gorgone cannot load a Perl moduleReinstall from trixie; apt-plugins-stable trixie
Step 8 exportEngine still on the old configExport again with Move checked
Step 9snmptrapd inactiveNormal (socket-activated)
MariaDB 11.8 toolsmysql: Deprecated program name …Cosmetic; use mariadb
4b, 7.5 (MariaDB root with a password)mariadb-upgrade --check-if-upgrade-is-needed → needed after the upgrade, nothing loggedRun mariadb-upgrade yourself
Step 3NO_PUBKEY on the MaxScale lineComment only that line

MariaDB/MySQL equivalents​

ItemMariaDBMySQL (Oracle repo.mysql.com)
Service, clientmariadbmysql
Dumpmysqldump / mariadb-dumpmysqldump
Centreon packagecentreon-mariadbcentreon-mysql
Repository filemariadb.sources or mariadb.listmysql.list + mysql-apt-config
Version10.11 → 11.8 (major)8.4 → 8.4 LTS, Debian 13 build
Data upgrademariadb-upgrade, run by the packageautomatic at server start
Root accesssudo mariadb if unix_socket, else /root/.my.cnf/root/.my.cnf
Config dir/etc/mysql/mariadb.conf.d//etc/mysql/mysql.conf.d/